This tool insert is a retro fit to anyone that has previously bought any of the original Mk1 Tubelaggers.

This is ONLY for the insert tool 15mm x 9mm wall insulation, NOT FOR THE COMPLETE LAGGER.

The post Mk1 Tubelagger Insert only .. for 9mm wall insulation appeared first on Dr PiPe.

It comes with a key ring to attach to your bag or even carry on your keys and endless possibilities. The main benefit is that once fitted, you no longer need fear that dreaded unspooling of the roll either dropping etc. Wasting less and using more: win-win.

So here’s how you choose which is correct variation for your needs.

1. Either measure the spool and identify the size that suits
2. Choose the Brand you buy from and identify
3. Check what you have chosen fits the “Type” of tape, yellow or white
4. All variations are fitting correctly as at March 2022

We supply empty cases only. No tapes supplied.

Each variation fits ONLY THE SPECIFIED BRAND – NO OTHERS, UNLESS BY CHANCE.

Choose the right version as these CANNOT be returned unless FAULTY.

DO NOT ORDER UNLESS YOU KNOW WHAT YOU ARE ORDERING !

The post PTFE Single Roll Holder appeared first on Dr PiPe.

This will hold 1 continuous strip of 5m x 38mm and keep it for easy access and replacement. The holder has a metal core with lid and body. The slot is not for tearing off, simply tear between your fingers. Reloading is an easy task with the clever access slot design.

The 38mm strip is a standard sized used by many within the heating industry for cleaning pipes and sanding. Its available at many stockists inc BES and the usual haunts. Just cut the length to 5m and enjoy clean and easily dispensable product safely stored conveniently for use with ease.

How to load…

Strip Hack…

*****PLEASE NOTE ….Colours and design are random So May Vary to what’s shown.. An abrasive strip is NOT included. ********

Standard £4.99 postage or free with other items in the same bracket.

The post Abrasive Strip Holder Eco Zero Waste. appeared first on Dr PiPe.

Clip only supplied. All other products are for visual indication.

The post ManupClip appeared first on Dr PiPe.

Same colour at present but the colour may be changed at our discretion.

The post Tubelagger Pro 28mm appeared first on Dr PiPe.

This is the complete package for 22mm and 15mm pipe lagging using standard 13mm wall thick insulation. If you want to cut every angle in insulation, don’t cut corners… use the Tube Lagger Pro Mk2.5 and you’re covered.

Includes 22mm outer dock and inner core with 15mm.

Unique compact design.

For 28mm pipes, use the Tubelagger Pro 28mm.

The post Tube Lagger Pro Mk2.5 appeared first on Dr PiPe.

Restocking as of 12. feb 2023 will be 4 Weeks until back in stock thank you

The post Gas Valve Adjustment Tool 2.5mm x 4mm hex appeared first on Dr PiPe.

From a simple 90^o bend, to both sections of a T joint. The simple design allows both parts to nestle within the 22mm docking station, encompassing a flat base for sturdy application. The tubes feature “Sight” lines for perfect alignment every time.

This product is 3D printed.

They will be in stealth Green only ! So become part of the initial journey of the development of this product, from dream to conception. Thank you.

This product has been tested on many variants of 13mm wall thick Insulation. Climaflex, Armaflex and a few others. We found variations in ALL the products we tried. With this in mind this product will not fit all samples perfectly some will be a little tight and some a little loose, But the vast majority should fit perfectly- 90% in our testing. With this in mind we would suggest this;

With the insulation ready for the job, the ones that you find that will not slide thru the Tube lagger Pro® .. use those for straight runs and the rest use for your cuts and variations. Enjoy.

Free UK postage.

Thank you for purchasing Tube Lagger Pro (TLP)

If you follow me on social media, you’ll know I’m a perfectionist. However, I realised early on in Tube Lagger Pro’s development that all we installers need is simply a good tool to do the job rather than some overly complicated expensive engineering perfection. With that in mind, below are some tips to make your life easier.

First, as you’ll have realised, the Tube Lagger Pro is 3D printed. 3D printing is great for applications such as this (low volume products) but it’s far from perfect. Please take note:

• Treat it with a little respect. Do not put excessive weight on it and try not to drop it.
• Keep them coupled together when not in use as they are stronger when stored together.
• Use a sharp knife to cut the insulation and use the TLP as a guide NOT a cutting surface. See my video on YouTube. If you cut into the product you WILL weaken it and you WILL shorten its life. If you do cut into its surface, you can gently sand out imperfections.
•  If using a fully extended blade make sure to retract it when you’ve done

TIPS

• Use the alignment marks in the TLP to make repeatable cuts
• Always test on a spare piece of lagging before committing yourself to any job
• To remove the inner template, push with your thumb from the vertical end NOT the 45 degree end. The inner template will come out the 45 degree end. Reassemble in opposite direction.
• Not all insulation is identical in outside dia. Any that is too big to fit inside the TLP put to one side to be used on straight runs. TLP is sized to fit approx. 90% of supplied lagging so perfect for angles & Tees.
• ALWAYS store them together

To make the next version even better, please share your experiences via social media using the hashtag #RateMyMitre. Constructive, objective feedback is vital for all products because it can only ever make things better. Feel free to post images and videos so that not only other trades people but customers too can see how much you care about doing a great job.

Thank you & enjoy

Dr PiPe

The post The Original ..Tube Lagger Pro ® appeared first on Dr PiPe.

The Flue phew is a simple but effective way of storing the Flue Gas Analysis cap. Available in red, C/w key ring for safe attachment. It is available In 3 Variants. Vaillant, Fits the Ecotec & Ecofit Pure range. It also fits the Gloworm range as its part of the Vaillant Brand. 300 sold to Vaillant Uk Service Engineers.

Variant 2 is the Worcester Bosch Cap holder which covers the Worcester HE Range.

Variant 3 is the Baxi type which covers the Baxi plug type cap as featured in the photo.

Cost…£4.99 when ordered with another product (So No Postage charge )

More than 1 ordered No extra postage up to 5.

The second photo shows a gas analysis tool carrying a selection of Flue Phews. The gas analysis tool is not included in the sale.

The post Flue Phew ® appeared first on Dr PiPe.

The colour is random.

The main photograph shows the tool which is supplied. The second photograph shows our tool in use on a brass drain down valve. The valve is not included in the sale.

The post Baxi ISO Spanner ® appeared first on Dr PiPe.